Market Intelligence

Why Hotel Rates Can't Be Compared Across Currencies

Reviewed by Mark Joefer, Hotel Market Intelligence Researcher
Back to Insights
Reading market dataHotel Rate Comparison Currency
Four stacks of foreign banknotes in soft focus beside a hotel bell on a reception counter

An AUD rate and an NZD rate can both read 250. They are not the same price, and turning one into the other doesn't fix that. It adds a second market, the currency market, to a question that was only ever about hotels.

Quick answer

Hotel rate comparison, currency first: amounts in different currencies can't be compared, and converting them mixes hotel pricing with exchange-rate movement. RevPARGenius reports every market in its own currency and never converts. Compare markets with percentages instead. In December 2026 the typical Perth hotel's weekend premium was 0.9% across 65 of 66 hotels, spike nights excluded, captured 9 November 2026; in Queenstown it was -2.9% across 25 hotels, captured the same day.

Why can't hotel rates be compared across currencies?

Because the number on a rate only means something inside its own currency. A hotel in Queenstown sets its rate in NZD for guests paying in NZD; a hotel in Perth sets its rate in AUD. Setting the two amounts side by side compares two units of measure, not two prices.

This sounds obvious, but the mistake turns up all the time. A group owner reviews a portfolio and lines up Saturday rates from three countries in one column. A consultant's slide shows "rates across the region" with amounts in four currencies on the same axis. A GM reads that a market middle in one country is a larger number than in another and draws a conclusion. Every one of those comparisons is reading the currency, not the hotels.

RevPARGenius handles this with one rule: every market is reported in its local currency, written as an ISO code before the number, and amounts are never converted or set against amounts in another currency. When we compare markets, we compare percentages. The same discipline is worth asking of any tool you use; our overview of how hotel market intelligence tools compare covers what to look for.

What goes wrong when you convert one currency into another?

Conversion brings in a number that has nothing to do with hotel pricing: the exchange rate, on one particular day. If that rate moves, a market can look dearer or cheaper while every hotel in it holds its price. The converted figure also describes a price no guest in that market actually sees or pays.

Think about what a conversion actually does. You take a hotel's asking rate, set in its own currency, and multiply it by an exchange rate taken from a different market entirely, on a date you picked. The result now moves when either number moves. Over a few weeks the exchange rate can shift more than the hotel's own rate does, and the converted series will show a trend that is really a currency story.

Then there is the question of which exchange rate. A mid-market rate, a bank's selling rate and a card provider's rate are all different, and none of them is what a hotel had in mind when it set its price. A guest paying from abroad may see yet another amount after their own bank's conversion. Each choice gives a different answer, so the converted figure carries a hidden assumption into every chart it appears on.

Finally, a converted amount ignores what that money buys locally. Wages, costs and what guests expect to pay for a room all differ between countries. A rate that looks high after conversion can be ordinary in its own market, and the reverse.

What can be compared across markets instead?

Shapes, measured as percentages within each market. A weekend premium, how far a peak night sits above its month, and how many hotels showed a public rate all read the same way in any currency. They describe how each market behaves without ever setting one currency's amount beside another's.

Publicly advertised hotel rates, 1 night, 2 adults, 1 room, cheapest offer, each market in its own currency (tax treatment as displayed). Weekend premium shows how much more the typical hotel asks for a Friday or Saturday night than for a Sunday to Thursday night, spike nights excluded (the Market Trends headline basis); a minus means the typical hotel asks less at weekends. The highest night is measured against the December middle with spike nights included. 15+ hotels priced per night. No amounts are compared across currencies.
MarketHotelsCapturedCurrencyDecember weekend premiumHighest December night vs December middle
Perth669 Nov 2026AUD+0.9%+49% (Thu 31 Dec, 49 priced)
Queenstown259 Nov 2026NZD-2.9%+109% (Fri 25 Dec, 16 priced)
Singapore919 Nov 2026SGD+2.1%+96% (Sat 19 Dec, 66 priced)
Bangkok859 Nov 2026THB+3.8%+39% (Tue 29 Dec, 73 priced)

Read across the rows and you learn real things about the four markets without a single conversion. All four have small, flat or negative December weekend premiums. Queenstown's typical hotel asks slightly less for a Friday or Saturday than for a weeknight in December. Singapore's highest night is not a holiday at all but Sat 19 December, nearly double the December middle, with 66 of 91 hotels priced. Perth peaks on New Year's Eve, Queenstown on Christmas Day, and Bangkok on Tue 29 December, two nights before New Year's Eve.

Notice what the table does not say. It does not say Singapore is "more expensive" than Bangkok, or that Queenstown costs more than Perth. Those statements need amounts, and amounts in different currencies cannot answer them honestly. The Singapore December 2026 read and the Queenstown December 2026 read each show their market's nights in full, in their own currency.

A rule worth quoting

Compare amounts only within one currency. Compare markets with percentages. A weekend premium, a night measured against its month and a count of hotels priced travel across currencies; a rate does not.

How do you compare two of your own hotels in different countries?

Measure each against its home market, in its own currency, and compare the gaps as percentages. That tells you which hotel sits higher or lower within its market. It avoids the trap of reading one property as the dearer one just because its currency produces larger numbers.

Example (synthetic)

An owner has two hotels: Property A, a 40-room coastal hotel in Australia, and Property B, a 30-room lakeside hotel in New Zealand. Every figure below is invented. On a fictional Saturday, each is set against its home market's middle, in its own currency.

Synthetic data for two fictional hotels. Gap = (own rate − own market middle) / own market middle, calculated within each currency. The two rates are never compared with each other.
PropertyOwn Saturday rateOwn market middleCurrencyGap vs own market
Property A (Australia)250270AUD-7.4%
Property B (New Zealand)290275NZD+5.5%

Lined up as amounts, the two rows invite the wrong question: is Property B the dearer hotel? The data can't answer that. Read as gaps, the two rows answer a useful question. Property A sits 7.4% under its market middle on that Saturday; Property B sits 5.5% above its own. That is a difference in position, and it holds whatever the exchange rate does next week.

The gap is a starting point, not a verdict. Property A may sit under its market because it is smaller, further from the water, or selling a room type the market middle doesn't reflect. Property B may sit above because it is the only lakeside option in its search. Each hotel's pickup and booking records say which.

What if a market shows up in a currency you didn't expect?

Stop and check before using the figure. A market should always report in its local currency: a Tasmanian market in AUD, a New Zealand market in NZD. A rate that appears in the wrong currency usually means the search or the capture went wrong, and any comparison built on it inherits that error.

This is one of the checks RevPARGenius runs before a market figure is published: if a market's currency looks wrong, such as an Australian market showing NZD or USD, the capture is checked before anything goes into a post. The same test is worth running on any report you receive. A single row in the wrong currency in a table of local-currency figures can look like a wild outlier when it is really a labelling problem.

Tax can cause a similar illusion inside one currency. Two rates in the same currency can still differ by 10% or 15% if one shows GST and the other doesn't, which we cover in keeping tax like for like.

RevPARGenius Take

Currency turns a rate comparison into a question about exchange rates, and no hotel prices its rooms off another country's currency. Keep every amount in its own currency and compare markets through percentages: weekend premiums, nights against their month, counts of hotels priced. The shapes travel; the amounts don't.

What to check in your own data

  • Do any of your portfolio or board reports line up rates from different currencies in one column or one chart?
  • If a report converts rates, which exchange rate and which date does it use, and does anyone reading it know?
  • For each of your hotels, what is its gap to its own market middle, and how has that gap moved over the last month?
  • Are there market figures in your reports whose currency you have not confirmed?

Want to see where your own hotel sits against your market, night by night? Request your free property view. One per property; we review each request.

Frequently asked questions

What does this read tell a hotel owner or revenue manager?

Currency turns a rate comparison into a question about exchange rates, and no hotel prices its rooms off another country's currency. Keep every amount in its own currency and compare markets through percentages: weekend premiums, nights against their month, counts of hotels priced. It describes what hotels ask on public channels, not what they achieve; your own records show the rest.

Can I convert hotel rates to one currency for a board report?

You can, but the converted figures will move with the exchange rate as well as with hotel pricing, and that mix is hard to read. Showing each hotel's gap to its own market as a percentage gives the board a comparison that does not depend on the currency market.

Why does RevPARGenius put the currency code before the number?

Writing the ISO code first, such as AUD or NZD, makes the currency impossible to miss and avoids symbols that mean different currencies in different countries. It also makes accidental comparisons across currencies easier to spot.

Is a weekend premium comparable between Australia and New Zealand?

Yes. A weekend premium is a percentage: how much more the typical hotel asks for a Friday or Saturday night than for a Sunday to Thursday night, so it reads the same way in any currency. It compares the shape of two markets, not their price levels.

Does an exchange-rate move change what hotels are asking?

Not in their own currency. A hotel's local rate stays where the hotel set it. Only a converted figure moves with the exchange rate, which is why converted series can show trends that no hotel created.

Which currency do RevPARGenius market reads use?

Each market is reported in its local currency on one search basis: 1 night, 2 adults, 1 room, cheapest offer. An Australian market is in AUD, a New Zealand market in NZD, Singapore in SGD and Bangkok in THB.

Every market on the market trends page is shown in its own currency, so the comparisons that travel are the shapes, not the amounts.

Free property view

See your own hotel against your market

Night by night, against the hotels around you. One per property; we review each request.

Request your free property view
See the market trends
See all insights

Data sources: RevPARGenius captures of publicly advertised OTA rates, captured 9 November 2026; stay nights 1 to 31 December 2026. Analysis run November 2026. Last reviewed November 2026. RevPARGenius is a hotel market intelligence platform.

Research methodology and disclosures: Market figures in this article are calculated by RevPARGenius from room rates publicly displayed on online travel agency (OTA) channels, on one search basis (1 night, 2 adults, 1 room, cheapest offer shown). We publish a market figure only where at least 15 properties were priced. The figures are advertised asking prices. They do not show occupancy, bookings, negotiated corporate rates or revenue achieved. Worked examples marked as synthetic use invented data. This article is general information, not pricing advice: each hotel sets its own rates independently.


Hotel Market Intelligence

Ready to see your market?

Request a market brief for your property: how your advertised rates compare with your market, night by night.

Request Market Analysis Explore Demand Analysis
Run Demand Analysis Free
RevEyeQ Market Intelligence Assistant • Online

See the market before it moves.

Get practical hotel revenue guidance and connect with our team for a tailored market analysis.

Your session has ended.

Ready to go deeper? Our team can run a full market intelligence report for your destination.

Contact Our Team

hello@revpargenius.com

We typically respond within one business day.

20 of 20 questions remaining

Disclaimer: RevEyeQ provides directional hotel revenue intelligence based on available live data and market signals. It may occasionally miss context, contain data gaps, or produce imperfect interpretations. Please use this analysis as a decision-support tool, not as the sole basis for pricing action. For a more accurate review, tailored recommendations, or commercial support, please email hello@revpargenius.com.

Looking to improve pricing performance automatically? Hotels using automated dynamic pricing typically benefit from forward-looking market monitoring, multiple daily rate updates, 365-day pricing coverage, user-controlled rate guardrails, and real-time response to demand shifts, events, and competitor movement. Many properties also see meaningful revenue uplift, time savings, and better consistency than manual pricing alone. If you'd like recommendations on whether this approach fits your property, email hello@revpargenius.com.